亚洲国产综合无码一区_国产a毛片精品日日夜_免费看Av中文字幕在线_自拍日本乱伦中文_国产精品成人黄色视频_五月天丁香六月婷婷网_会员免费体验区亚洲天堂_亚洲欧美性另类春色_少妇被又粗又硬猛烈进出小说_免费看h黄动漫网站网址

Hello, welcome to Huaxin
Power Transformer Series

35KV SCB10 Series Epoxy Resin Casting Dry-type Distribution Transformer

The 35KV SCB10 Series Epoxy Resin Casting Dry Type Distribution Transformer is suitable for special electricity occasions with direct conversion from 35kV electricity grid voltage to 400V. Compared with 6 to 10kV distribution transformer, this type of transformer has higher requirements for product manufacturing. Therefore, the unique transformer casting local discharge control technology and internal stress control process are adopted to control the internal insulation at the most ideal state, so as to guarantee key performance of the transformer.

  • Model Description

    Technical Parameters

     

    Rated 

    Capacity 

    (KVA)

    Voltage Combination

    Connection 

    Unit Symbol

    Idle Load Loss (W)

    Load Loss 155℃ (W)

    No-load 

    Current (%)

    Short-circuit Impedance (%)

    High-voltage (KV)

    Tapping (%)

    Low-voltage (KV)

    800

    35

    ±2×2.5       ±5  

    3.15            6                  6.3              10             10.5             11

    Dyn11             Yd11          Y yn0

    2250

    9100

    0.95

    6

    1000

    2670

    10900

    0.95

    1250

    3130

    12900

    0.85

    1600

    3690

    15400

    0.85

    2000

    4230

    18200

    0.75

    7

    2500

    4860

    21800

    0.75

    3150

    6030

    24500

    0.7

    8

  • 1. The high-quality cold rolled oriented silicon steel sheet is selected for the iron core, which has 45° fully beveled seam and five-step folding iron mode. Both the core column and the iron yoke have the multi-stage round section shape, low no-load loss and low noise can be obtained.

    2. According to the transformer capacity, the flat copper wire wrapped with double glass paints is adopted as the high-voltage conductor, and Grade H glass fiber cloth and glass felt are adopted for inter-laminar insulation. The low-voltage conductor is wounded with copper foil, epoxy resin prepreg cloth is adopted for inter-laminar insulation. Both of them have very high mechanical strength and resistance to sudden short circuit.

    3. The coordination structure between the low magnet steel pulling plates and clamps is adopted, sand blasting and plastic spraying are conducted, and the overall structure is artistic and has high mechanical strength.

    4. Each phase is equipped with the independent axial flow blower and split-type thermostat, which can effectively reduce temperature rise, improve transformer output capacity, and guarantee safe operation of the transformer.

  • Rated Capacity (KVA)

    Dimensions (mm) L × W × H

    Weight (kg)

    800

     

     

    1000

     

     

    1250

     

     

    1600

     

     

    2000

    1915×1320×1750

    4800

    2500

     

     

    3150

     

     

  • 1. Safe, fire-proof and pollution-free. It can be directly operated at the load center.

    2. Adopting the HTT technology from Germany. with high mechanical strength, strong anti-short circuit capacity, small local discharge and good thermal stability.

    3. Small volume, light weight, less space occupying and convenient installation

    4. Low loss, low noise, maintenance-free and remarkable energy-saving effects

    5. Damp-proof, mildew proof, salt fog proof, good heat dissipation, suitable for operation at high elevation, high humidity and other harsh environments

  • 1. The elevation shall not exceed 1000m

    2. Ambient temperature      Maximum temperature                             +40℃/+104oF

                                                Maximum daily average temperature      +30℃/+86oF 

                                                Maximum annual average temperature  +20℃/+68oF

                                                Minimum temperature                             -30℃ / -22 oF (applicable for the outdoor transformer)

                                                Minimum temperature                             -5℃/+23oF  (applicable for the indoor transformer)

    3. The waveform of the supply voltage is similar to a sine wave

    4. The supply voltage connected with the multi-phase transformer shall be approximately symmetrical.


Contact information

Submit your inquiry
Name:
Your message:
Phone:
E-Mail:
Company:
Name:
Country:
   

Your local Huaxin Sales Team

  • NameKai Wang
  • AddressHuaxin Industrial Park, Yangquan, Shanxi, China 045000
  • PhoneChina:15234310529,Canada:+1 3067132408
  • E-mailkwang@hxindustrial.com
Close
Submit your inquiry
Name:
Your message:
Phone:
E-Mail:
Company:
Name:
Country:
   

Your local Huaxin Service Team

  • NameKai Wang
  • AddressHuaxin Industrial Park, Yangquan, Shanxi, China 045000
  • PhoneChina:15234310529,Canada:+1 3067132408
  • E-mailkwang@hxindustrial.com
Close
Submit your inquiry
Name:
Your message:
Phone:
E-Mail:
Company:
Name:
Country:
   

Your local Huaxin Cooperation Team

  • NameKai Wang
  • AddressHuaxin Industrial Park, Yangquan, Shanxi, China 045000
  • PhoneChina:15234310529, Canada:+1 3067132408
  • E-mailkwang@hxindustrial.com
Close

©1996-2023 晉ICP備07500050號 Huaxin Copyright 

©1996-2023 晉ICP備07500050號 Huaxin Copyright