小说网,将夜猫腻小说

Paper-wrapped Flat Copper Wire and Flat Aluminum Wire

Hello, welcome to Huaxin

中文
- Home
- Products
- Industries
- Service
- Media
- Careers
- About
- Contact Us
- Message
- Online Pay

Nominal Dimension / mm

RoundBar Diameter

2.00＜b≤8.00

8.00＜b≤16,00

The product is formed by winding nomex paper, cable paper and polyimide film on the high-quality copper (aluminum) conductor, so that the film and the conductor are bound as a whole. The product has good voltage resistance and small insulation thickness, and the heat resistance is up to 220℃/428℉. It is mainly used for windings of the motors, reactors, electric welding machines or other similar electrical products.

Technical Parameters
External Dimensions of the Products
Product Features

Conductor Material:

The Flat Aluminum Wire shall conform to provisions in GB5584.3-2009, and resistivity at 20℃ shall not be larger than 0.0280Ωmm²/m.
The Flat Aluminum Wire shall conform to provisions in GB5584.2-2009, and resistivity at 20℃ shall not be larger than 0.017241Ωmm²/m.

After wide edge bending and narrow edge bending of the paper-wrapped line on the round bar specified in the following table, there is no cracking to bare conductor in the wrapping layer:

Breakdown Voltage of the Paper-wrapped Copper (Aluminum) Wire (enterprise standards):

Insulation Thickness / mm		The breakdown voltage shall not be less than
Nominal Value	Tolerance	The breakdown voltage shall not be less than
0.15	±0.03	5000V
0.2	±0.03
0.23	±0.03

Flat Aluminum Wire
    Dimension of the narrow edge a: 1.00mm - 8.00mm
    Dimension of the wide edge b: 3.00mm - 25.00mm
Flat Copper Wire
    Dimension of the narrow edge a: 0.90mm - 5.60mm
    Dimension of the wide edge b: 2.00mm - 16.00mm
If specifications selected exceed the above scope, please contact us
It has the advantages of smooth conductor surface, uniform dimensions and tensile strength, low resistivity and other advantages. The temperature resistance indexes of such products include four levels of 130, 155, 180 and 220 at present, and the insulation thickness generally includes four levels of 20, 30, 40, and 50. It can be taken as a finished product, or can also be taken as an in-progress product.