辰东完美世界有声小说,天域苍穹

Hello, welcome to Huaxin

中文

Stereoscopic warehouse

Failure information	Possible cause	Processing mode
The stacker cannot be started	There is failure	Reset - start
The touch screen of the stacker is not on	No power	Check power transmission of the power supply
The stacker does not receive command from the upper computer	Failure of wireless communication	Check whether the switch works normally
The stacker task is completed, and the command still works	Communication fault	Manual direct transfer
Failure of the horizontal / vertical frequency converter	Internal failure of the frequency converter	Reset - start, it still does not work after reset for 3 times. Contact the administrator
Horizontal / vertical laser protection	The barrier blocks laser	Move the barrier, reset - start
Horizontal / vertical limit travel protection		Forced mode, drive the stacker in the roadway
The transmission platform is occupied	There are people, goods and articles on the transmission platform at the automatic start standby state	Move the barrier, reset - start
Goods on the transmission platform is too wide	Goods exceed the tray width or the tray is skewed	Place the goods again, and correct the tray
Goods on the transmission platform is super high	The goods height exceeds the allowed height	Reduce the quantity of plates, and lower the goods height
Goods on the transmission platform is ultra long	Goods exceed the tray length or the tray is skewed	Place the goods again, and correct the tray
The fork skids	The fork pulse counting is inaccurate	Complete current work of the fork manually, reset - start
Broken rope protection	The safety caliper makes action, and clamps the mast guide rail	Contact the administrator
The fork is empty for ex-warehouse	There is no tray at the pickup position of the fork	Clear task
The transmission platform is warehoused again	Wrong dispatching of the upper computer	Clear task, and allocate the storage bin again
Fork protection of the transmission platform		Reset - start
Maloperation of fork of the transmission platform	Program operation error	Contact the administrator
Abnormal noise of the stacker	Anomaly of stacker motor	Contact the administrator
Alarm of thermal relay of ground conveying line	Anomaly or excessive operation of the conveyor motor	Replace the motor, or suspend work of the conveyor
Abnormal operation of goods in the conveyor	No photoelectric induction of the conveyor	Check photoelectricity, and wipe dust
Goods overweight	There are excessive goods on the tray or the electronic scale is damaged	Reduce goods, and check whether the electronic scale is normal
Abnormal friction and noise when the stacker extends and retracts the fork	The tray is damaged	Replace the tray